Filter
Top Products
42
LEARNING THE SOUND FORGE WORKSPACE CHP. 3
Selecting data in stereo files
When editing a stereo file, the waveform display is divided into three sections. The mouse pointer location
determines which channel (or channels) is selected.
• The upper quarter of the data window selects the left channel.
• The lower quarter of the data window selects the right channel.
• The middle half of the data window selects both channels.
1.
Open a stereo file.
2.
Select the Edit tool by choosing Tool from the Edit menu and Edit from the submenu.
Press + or click the
Edit Tool button ( ) on the Standard toolbar.
3.
Position the tool near the top of the left channel and notice its appearance. The tool displays as . This
indicates that only audio data in the left channel will be selected.
4.
Position the tool in the middle portion of the data window and notice its appearance. The tool displays as
a standard cursor. This indicates that it will select a mono file or both channels of a stereo file.
Left channel only
Both channels
Right channel only
Ctrl D