Filter
Top Products
CHP. 10 PROCESSING AUDIO
157
Fade - Fade Out
The Fade Out command is used to linearly fade a selection from a volume of 0 dB to a volume of -Inf. The
size of the selection determines the length of the fade.
1.
Open the Musicbed.pca file and select all audio data.
2.
From the Process menu, choose Fade, and choose Out from the submenu. The fade is applied, and the
volume decreases over the length of the entire file.
Insert Silence
The Insert Silence command allows you to place sections of silence in audio files.
Note:
You cannot insert silence into a single channel of a
stereo file.
Inserting silence into a file
1.
Open the Musicbed.pca file.
2.
From the Process menu, choose Insert Silence. The Insert Silence dialog appears.
3.
From the Preset drop-down list, choose 2 second standard CD pause length at start of file and click OK. Sound
Forge inserts two seconds of silence at the start of the file.
Insert Silence controls
The following controls are located in the Insert Silence dialog.
Insert
Determines the length of the silent section.
At
Allows you to specify where the silence is inserted in the audio file.
Audio file fades out
from 0 dB to -Inf.
Insert Silence dialog