Filter
Top Products
34
LEARNING THE SOUND FORGE WORKSPACE CHP. 3
Effects toolbar
If you are using the full version of Sound Forge, the Effects toolbar contains buttons corresponding to all
Sound Forge’s built-in XFX™ plug-ins.
Acoustic Mirror: adds environmental coloration
to your existing recordings.
Flange/Wah-Wah: mixes a modulated delay
signal with the original signal.
Amplitude Modulation: applies a sinusoidal or
square-shaped periodic gain to the input signal.
Gapper/Snipper: removes/inserts sections of
silence at regular intervals to create unusual
effects.
Chorus: simulates multiple audio sources from
a single sound.
Noise Gate: removes signals below a set
amplitude threshold.
Multi-Tap Delay: creates a delay with up to
eight delay-taps spaced anywhere within 2.5
seconds of the original sound.
Pitch Bend: creates a modified sound envelope
that corresponds to increasing or decreasing
the pitch of a sound file over time.
Simple Delay: adds a delayed copy of the audio
signal to the file.
Pitch Shift: changes the pitch of a selection
with or without preserving the duration of the
file.
Distortion: simulates the overloading of an
amplifier.
Reverb: simulates the acoustics of different
environments.
Graphic Dynamics: applies compression,
expansion, and limiting to affect the dynamic
range of an audio file.
Vibrato: creates periodic pitch modulation in an
audio file.
Multi-Band Dynamics: allows compression and
limiting to be placed on up to four different
frequency bands.
Wave Hammer: acts as a classic compressor
and volume maximizer.
Envelope: forces the amplitude envelope of a
waveform to match a specified envelope shape.