Filter
Top Products
136
EDITING, REPAIRING, AND SYNTHESIZING AUDIO CHP. 9
Mixing
1.
Open the Voiceover.pca and Drumhit.pca audio files.
2.
Select all audio data in the Drumhit data window.
3.
Drag the selection to the Voiceover data window.
• A shaded region representing the source selection appears in the destination window.
• An “M” appears in the box adjacent to the pointer.
4.
Position the leading edge of the shaded region in the Voiceover data window where the mixing of the
selection will begin.
5.
Release the mouse button. The Mix dialog appears.
6.
Verify that both Volume levels are set to 0 dB and click OK.
Toggling the Mix/Paste/Crossfade functions
An alternate way of specifying a mix, paste, or crossfade is the mouse toggle method.
1.
Open the Voiceover.pca and Drumhit.pca files.
2.
Select all audio data in the Drumhit data window.
3.
Drag the selection to the Voiceover data window.
• A shaded region representing the source selection appears in the destination window.
• A letter appears in the box adjacent to the pointer.
4.
Continue holding the left mouse button while clicking the right mouse button. The letter in the box and
the appearance of the selection region change to indicate the current drag-and-drop mode.
5.
Release the left mouse button. The source audio data is pasted, mixed, or crossfaded into the destination
data.
Drag-and-drop
mix indicator
Selection is mixed into
the destination window