Filter
Top Products
GFK-0825F Chapter 5 Station Configuration 5-31
5
Input Current Ranges
Select a current range for each channel, to correspond to the signal level of the input device. Note
that Current Source Analog Input Module (IC670ALG230) and Current Source Analog Output
Module (IC670ALG320) cannot be used with negative voltages.
0 to 20mA for current modules
4 to 20 mA "
S1 Range Ch 01
< > tgl entr
0ma - 20mA
Number of the
channel you are
now configuring
1. For each channel, use the F3 (tgl) key to select a range.
2. Use the F1 ( < ) and F2 ( > ) keys to select channels.
3. Use the F4 (entr) key to save the selections on this screen.
4. Press F2 to go to the next screen.
Note
Range Selection is a setup parameter; it is not ordinarily changed while the
module is operating.