Filter
Top Products
3-2 Field Control™ Genius® Bus Interface Unit User’s Manual
–
October 1999 GFK-0825F
3
Preinstallation Check
Carefully inspect all shipping containers for damage during shipping. If any part of the system is
damaged, notify the carrier immediately. The damaged shipping container should be saved as
evidence for inspection by the carrier.
As the consignee, it is your responsibility to register a claim with the carrier for damage incurred
during shipment. However, GE Fanuc will fully cooperate with you, should such action be
necessary.
After unpacking the Field Control modules and other equipment, record all serial numbers. Serial
numbers are required if you should need to contact Product Service during the warranty period of
the equipment.
All shipping containers and all packing material should be saved should it be necessary to transport
or ship any part of the system.
Static Protection
The Bus Interface Unit has CMOS components that are susceptible to static damage.
Use proper
static handling techniques when handling this module.
Hand-held Monitor Connector
The connector on the Genius Bus Interface Unit is intended for use with a Genius Hand-held
Monitor only. It must be connected to a nonincendive circuit only.
HHM (must be connected to
a nonincendive circuit only)