Filter
Top Products
GFK-0825F Chapter 5 Station Configuration 5-67
5
Circuit Configuration
The sequence in which circuit configuration screens appear depends on the revision level of the
module, the Hand-held Monitor and the BIU.
Channel Header
For module version IC670ALG620, version 1.4 or later, if the BIU and Hand-held Monitor support
display of channel headers, a header screen appears for each channel as shown below.
S:1 CH 1 CONFIG
< > zoom
A. Press F2 (>) from this screen to go to the header screen for the next channel. Pressing F2 (>)
from channel 8 displays the module's first reference parameter screen.
B. Press F1 (<) from this screen to go to the header screen for the previous channel. Pressing F1
(<) from channel 1 displays the module's last reference parameter screen.
C. Press F4 (zoom) to go to the first configuration screen for the channel.
D. When in a channel-specific configuration screen, press the up arrow/MENU key to go to that
channel's header screen.
If the BIU and Hand-held Monitor do not support display of channel headers, the header screens do
not appear and keys F1 (<) and F2 (>) are used to scroll through channel-specific configuration
screens.
The following features are configured for each channel.