Filter
Top Products
GFK-0825F Chapter 5 Station Configuration 5-75
5
Line Frequency
Next, set the line frequency for the module. Select 50 or 60 Hz.
S:1 LINE FREQ
60 HZ
< > tgl entr
Suppress Open Thermocouple Diagnostic
S:4 OTC SUPPRESS
NO
< > tgl entr
Configure whether the module should perform Open Thermocouple diagnostics on the input data.
1. Select NO (the default) if the module should perform Open Thermocouple diagnostics. Select
YES if it should not.
2. Use the F4 (enter) key to save the selections on this screen and go on to the next item.