Filter
Top Products
Index
Index-2 Field Control™ Genius® Bus Interface Unit User’s Manual– October 1999 GFK-0825F
RTD module, 5-68
Thermocouple module, 5-76
Circuit configuration
RTD module, 5-67
Clearances required, 3-5
Communications
loss of, 4-11
on Genius bus, 4-9
Communications buffer, 4-6
Compatibility among devices, 1-9
Configuration
creating, 5-4
datagram format, 8-7
delete module, 5-21
modules, 5-15
preventing/permitting changes, 5-14
selectable features, 1-6
Configuration Mismatch fault, 5-2
Control wiring, 3-3, C-1
CPU Redundancy
configuring, 5-12
CRC checking, C-11
Current/voltage range
configuring for analog input module, 5-31
configuring for analog output module, 5-38
D
Data defaults
Analog Grouped Input module, 5-42, 5-50, 5-58,
5-93
Analog Voltage Output module, 5-84
Micro Field Processor data, 5-101
RTD module, 5-66
Thermocouple input module, 5-74
Data types for BIU, 4-3
Datagrams for the BIU
Analog Module Recalibration, 8-30
list of, 8-2
Read Configuration Data, 8-7
Read Configuration Reply, 8-8
Read I/O Forces, 8-32
Read I/O Forces Reply, 8-32
Read Map, 8-3
Read Map Reply, 8-3
Read Slot Diagnostics, 8-33
Read Slot Diagnostics Reply, 8-33
Report Fault datagram format, 8-5, 8-7
Write Configuration, 8-8
Write Map, 8-4
Default/Hold Last State
Analog input module, 5-34
Analog output module, 5-36
Discrete input module, 5-23
discrete output module, 5-25, 5-27, 5-28
Dimensions of BIU, 2-1
DIN rail
installing Terminal Block, 3-7
mounting, 3-5
removing Terminal Block, 3-7
Discrete Input Module
/O references, 5-22
configuration format for datagram, 8-11
configuration steps, 5-22
default/hold last state, 5-23
fault reporting, 5-23
Discrete inputs, 4-10
Discrete Output Module
configuration format for datagram, 8-12, 8-13
configuration steps, 5-24, 5-26
default/hold last state, 5-25, 5-27, 5-28
fault reporting, 5-25, 5-27
I/O references, 5-24, 5-26
Discrete outputs, 4-11
Display and clear faults from LM90-70, 6-5
Duplex CPU redundancy, 1-10, 5-12
E
EEPROM
remove and replace, 3-16
Enclosures, 3-5
Equipment required with Field Control, 1-9
ESD protection, 3-2
F
Fault Report datagram, 8-5
Fault Reporting
Analog input module, 5-30
Analog output module, 5-37
configuration, 5-23
configuring for the Bus Interface Unit, 5-10
Discrete output module, 5-25, 5-27
Faults
clearing, 6-3
display with Logicmaster 90-70, 6-5
handling by Field Processor, 6-2
Features, 1-1
Fiber optics, C-11
Filtering
configuring for Grouped Analog Input module,
5-43, 5-51, 5-59, 5-94
Firmware upgrade, 3-16
Forcing I/O data, 7-2, 7-5
Functional specifications, 2-9
Fuse
BIU, 2-1, 3-15
replacing, 3-15
G
Genius Field Processor