Filter
Top Products
7-4 Field Control™ Genius® Bus Interface Unit User’s Manual
–
October 1999 GFK-0825F
7
The first screen that appears is the Monitor screen for the first discrete input ( I ) reference.
I00001 *0 B
< > frc hex
Reference being monitored
Current state or value
Display mode:
B binary
H hex
D decimal
Indicates force is in effect
Changing the Reference Type Being Displayed
Use the F1 ( < ) key to select a reference type: I (discrete inputs), Q (discrete outputs), AQ (analog
outputs), or AI (analog inputs).
Stepping Through the Configured References of the Displayed Type
Use the F2 ( > ) key to advance through the point reference screens for the selected reference type.
Displaying a Specific Reference
If you want to go directly to a specific reference:
1. Display the reference type ( I (discrete inputs), Q (discrete outputs), AQ (analog outputs), or
AI (analog inputs) as described above).
2. Press the HHM's + key.
3. Enter the reference number from the keypad.
4. Press the F4 (enter) key.
Displaying References that are Outside the BIU's I/O Map
If you want to display a reference that lies outside the I/O map that has been configured for the Bus
Interface Unit, follow the instructions for Displaying a Specific Reference.
Changing the Display Mode
Use the F4 (mode) key to change the displayed point state or value to hex (H), binary (B) or
decimal (D) format.
Returning to the Previous Menu
From this screen, press the HHM Clear key to return to the main Bus Interface Unit menu.