Filter
Top Products
GFK-0825F Appendix D Configuration Examples D-5
D
Group Move #3: Source slot 3, Destination slot 0 (move RTD inputs to BIU input tables). All
submoves can be set to default to either Yes or No.
Submove 1: (Moves diagnostic bits)
Source reference I00001
Destination reference I00089
Length 4 bytes
Submove 2: (moves analog inputs)
Source reference AI00001
Destination reference AI00017
Length 8 bytes
Group Move #4: Source slot 0, Destination slot 3 (move control outputs from BIU tables to
RTD module).
Submove 1: Source reference Q00017
Destination reference Q00001
Length 1 byte
Group Move #5: Source slot 4, Destination slot 0 (move Thermocouple inputs to BIU input
tables). All submoves can be set to default to either Yes or No.
Submove 1: (Moves diagnostic bits)
Source reference I00001
Destination reference I00121
Length 6 bytes
Submove 2: (moves analog inputs)
Source reference AI00001
Destination reference AI00021
Length 16 bytes
Group Move #6: Source slot 0, Destination slot 4 (move control outputs from BIU tables to
Thermocouple module).
Submove 1: Source reference Q00025
Destination reference Q00001
Length 2 bytes
Group Move #7: Source slot 1, Destination slot 0 (move all outputs of MFP to BIU input tables).
All submoves are set to default to No (Hold Last State).
Submove 1: (Moves discrete inputs)
Source reference Q00001
Destination reference Q00001
Length 7 bytes
Group Move #8: Source slot 0, Destination slot 1 (move all inputs from station in BIU tables to
MFP input table).
Submove 1: Source reference I00001
Destination reference I00001
Length 21 bytes
Submove 2: Source reference AI00001
Destination reference AI00001
Length 56 bytes