Filter
Top Products
1-4 Field Control™ Genius® Bus Interface Unit User’s Manual
–
October 1999 GFK-0825F
1
I/O Terminal Blocks and Auxiliary I/O Terminal Blocks
An I/O Terminal Block provides mounting, electrical, and field wiring connections. Each half of
the I/O Terminal Block can be mechanically keyed to accept only an I/O module of a specific type.
Auxiliary I/O Terminal Blocks can be easily attached to an I/O Terminal Block. They can be used
to provide additional common terminals if needed.
For more information, please refer to:
Chapter 3: Installation
, which explains wiring to the Bus Interface Unit, and explains how to
install the Bus Interface Unit module on the Field Terminal Block.
Chapter 2: Description
, which describes the Bus Interface Unit and Bus Interface Unit Terminal
Block in detail.
Chapter 4, Operation
, which explains how the Genius Bus Interface Unit services I/O.
Chapter 5: Hand-Held Monitor Configuration
, which explains how to configure I/O modules.
The
Series 90
Micro Field Processor User's Manual
(GFK-1171), which describes the Micro
Field Processor (IC670MFP100) and provides installation procedures, operation information, and
diagnostics information.
The
Field Control I/O Modules User's Manual
(GFK-0826) which describes I/O modules and I/O
Terminal Blocks. This manual also explains module installation and field wiring.