Filter
Top Products
5-34 Field Control™ Genius® Bus Interface Unit User’s Manual
–
October 1999 GFK-0825F
5
Default Inputs or Hold Last Values
Next, configure what type of data the Bus Interface Unit should provide to the network controller if
it stops receiving actual input data from the module.
S1 Hld Lst State
< > tgl entr
NO
1. Select
YES
if the Bus Interface Unit should hold inputs in their last states and supply that data
to the network controller.
Select NO if the Bus Interface Unit should default all the module's inputs to 0 and supply that
data to the network controller instead.
2. Use the F4 (entr) key to save the entry.
3. Press F2 ( > ) to return to the original slot configuration screen.