Filter
Top Products
5-14 Field Control™ Genius® Bus Interface Unit User’s Manual
–
October 1999 GFK-0825F
5
Select Configuration Protection
This feature can be used to protect the station configuration. To make subsequent changes,
protection must be removed again. Before the station is used, its configuration should be protected.
CONFIG PROTECT
Disable
< > tgl entr
1. If the selection shown on line 3 should be changed, press F3 (tgl). Press F4 (entr).
2. This is the last Genius Bus Interface Unit configuration screen.
Tag Name Screen
Display only.
Tag Name
< > tgl entr
Review or Continue Configuration
If you want to review or change any of the Bus Interface Unit configuration entries, use the F1
( < ) key to return to the first Bus Interface Unit configuration screen.
If you want to continue to the next configuration screen, press the F2 ( > ) key.