Filter
Top Products
GFK-0825F Chapter 5 Station Configuration 5-53
5
Channel Active
When a channel is configured as Active, it is scanned for data and checked for errors. If a channel
should not be scanned, that channel can be configured as inactive. An inactive input channel returns
the value 0.
S: 2 CH 1
ACTI VE
< > tgl entr
1. If you want to change the displayed selection, press F3 (tgl).
2. Use the F4 (entr) key to save the selection.
3. Press F2 ( > ) to go to the next screen.
Input Range
On this screen, specify the range for the input. There are two predetermined range and data scaling
combinations.
S: 2 CH1 RANGE
- 10V t o +10V
< > tgl entr
The default is -10V to +10V.
Selection Input voltage (mV) = Data range
1 -10000 to 10000 = -10000 to 10000
2 0 to 10000 = 0 to 10000