Filter
Top Products
GFK-0825F Chapter 5 Station Configuration 5-107
5
Deleting a Group Data Move
To remove one or more Data Groups, begin at the Main Menu for the BIU:
F1 Monitor
F2 Configuration
From this menu, press F2 (Configuration). This menu appears:
F1 GENIUS CONFIG
F2 Module Config
More
Press F3 to display the next configuration screen:
F1 Grp Data Move
F2 Previous Menu
More
Press F1 to display the first Group Data Move configuration screen:
Grp Data Move 01
YYYYYYYYYYYYYYYY
< > del zoom
Group at Cursor
location
Each N or Y
represents a Group
Data move
On this screen, each of the 16 potential Data Groups is represented by a letter N (for No) or Y (for
Yes). The number of the Data Group indicated by the cursor also appears in the upper right corner
of the screen.
To delete a previously-configured data group, on the screen shown directly above, move the cursor
under the group to delete. Press F3 (delete) to remove the configuration for that group.