Filter
Top Products
C-49
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Appendix C Troubleshooting
Troubleshooting the Appliance
Step 12 Change the severity level (debug, timing, warning, or error) for a particular zone.
sensor(config-log)# zone-control IdsEventStore severity error
sensor(config-log)# show settings
master-control
-----------------------------------------------
enable-debug: true default: false
individual-zone-control: true default: false
-----------------------------------------------
zone-control (min: 0, max: 999999999, current: 14)
-----------------------------------------------
<protected entry>
zone-name: AuthenticationApp
severity: warning <defaulted>
<protected entry>
zone-name: Cid
severity: debug <defaulted>
<protected entry>
zone-name: Cli
severity: warning <defaulted>
<protected entry>
zone-name: IdapiCtlTrans
severity: warning <defaulted>
<protected entry>
zone-name: IdsEventStore
severity: error default: warning
<protected entry>
zone-name: MpInstaller
severity: warning <defaulted>
<protected entry>
zone-name: cmgr
severity: warning <defaulted>
<protected entry>
zone-name: cplane
severity: warning <defaulted>
<protected entry>
zone-name: csi
severity: warning <defaulted>
<protected entry>
zone-name: ctlTransSource
severity: warning <defaulted>
<protected entry>
zone-name: intfc
severity: warning <defaulted>
<protected entry>
zone-name: nac
severity: warning <defaulted>
<protected entry>
zone-name: sensorApp
severity: warning <defaulted>
<protected entry>
zone-name: tls
severity: warning <defaulted>
-----------------------------------------------
sensor(config-log)#
Step 13 Turn on debugging for a particular zone.
sensor(config-log)# zone-control nac severity debug
sensor(config-log)# show settings
master-control
-----------------------------------------------
enable-debug: true default: false
individual-zone-control: true default: false