Filter
Top Products
4-38
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 4 Setting Up the Sensor
Configuring Time
e. Verify your settings.
sensor(config-hos-rec-sta)# show settings
start-summertime
-----------------------------------------------
month: april default: april
week-of-month: first default: first
day-of-week: monday default: sunday
time-of-day: 12:00:00 default: 02:00:00
-----------------------------------------------
sensor(config-hos-rec-sta)#
Step 5 Enter end summertime submode.
sensor(config-hos-rec-sta)# exit
sensor(config-hos-rec)# end-summertime
Step 6 Configure the end summertime parameters:
a. Enter the day of the week you want to end summertime settings.
sensor(config-hos-rec-end)# day-of-week friday
b. Enter the month you want to end summertime settings.
sensor(config-hos-rec-end)# month october
c. Enter the time of day you want to end summertime settings. The format is hh:mm:ss.
sensor(config-hos-rec-end)# time-of-day 05:15:00
d. Enter the week of the month you want to end summertime settings. The values are first through fifth,
or last.
sensor(config-hos-rec-end)# week-of-month last
e. Verify your settings.
sensor(config-hos-rec-end)# show settings
end-summertime
-----------------------------------------------
month: october default: october
week-of-month: last default: last
day-of-week: friday default: sunday
time-of-day: 05:15:00 default: 02:00:00
-----------------------------------------------
sensor(config-hos-rec-end)#
Step 7 Specify the local time zone used during summertime.
sensor(config-hos-rec-end)# exit
sensor(config-hos-rec)# summertime-zone-name CDT
Step 8 Specify the offset.
sensor(config-hos-rec)# offset 60
Step 9 Verify your settings.
sensor(config-hos-rec)# show settings
recurring
-----------------------------------------------
offset: 60 minutes default: 60
summertime-zone-name: CDT
start-summertime
-----------------------------------------------
month: april default: april