Contents
v
Cisco Intrusion Prevention System Manager Express Configuration Guide for IPS 7.1
OL-19891-01
Configuring Sensor Settings 5-4
Configuring Interfaces 5-7
Interface Summary Window 5-7
Restore Defaults to an Interface Dialog Box 5-8
Traffic Inspection Mode Window 5-8
Interface Selection Window 5-9
Inline Interface Pair Window 5-9
Inline VLAN Pairs Window 5-9
Add and Edit Inline VLAN Pair Entry Dialog Boxes 5-10
Configuring Inline VLAN Pairs 5-10
Configuring Virtual Sensors 5-11
Virtual Sensors Window 5-11
Add Virtual Sensor Dialog Box 5-12
Adding a Virtual Sensor 5-13
Applying Signature Threat Profiles 5-14
Configuring Auto Update 5-16
CHAPTER
6 Setting Up the Sensor 6-1
Understanding Sensor Setup 6-1
Configuring Network Settings 6-1
Network Pane 6-2
Network Pane Field Definitions 6-2
Configuring Network Settings 6-3
Configuring Allowed Hosts/Networks 6-5
Allowed Hosts/Networks Pane 6-5
Allowed Hosts/Network Pane and Add and Edit Allowed Host Dialog Boxes Field
Definitions
6-6
Configuring Allowed Hosts and Networks 6-6
Configuring Time 6-7
Time Pane 6-7
Time Pane Field Definitions 6-7
Configure Summertime Dialog Box Field Definitions 6-8
Configuring Time on the Sensor 6-9
Time Sources and the Sensor 6-10
Synchronizing IPS Module System Clocks with Parent Device System Clocks 6-11
Verifying the Sensor is Synchronized with the NTP Server 6-11
Correcting Time on the Sensor 6-12
Configuring NTP 6-12
Configuring a Cisco Router to be an NTP Server 6-13