Filter
Top Products
16-9
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 16 Working With Configuration Files
Displaying the Current Submode Configuration
enable: true <defaulted>
yellow-threshold: 80 percent <defaulted>
red-threshold: 91 percent <defaulted>
-----------------------------------------------
missed-packet-policy
-----------------------------------------------
enable: true <defaulted>
yellow-threshold: 1 percent <defaulted>
red-threshold: 6 percent <defaulted>
-----------------------------------------------
memory-usage-policy
-----------------------------------------------
enable: false <defaulted>
yellow-threshold: 80 percent <defaulted>
red-threshold: 91 percent <defaulted>
-----------------------------------------------
signature-update-policy
-----------------------------------------------
enable: true <defaulted>
yellow-threshold: 30 days <defaulted>
red-threshold: 60 days <defaulted>
-----------------------------------------------
license-expiration-policy
-----------------------------------------------
enable: true <defaulted>
yellow-threshold: 30 days <defaulted>
red-threshold: 0 days <defaulted>
-----------------------------------------------
event-retrieval-policy
-----------------------------------------------
enable: true <defaulted>
yellow-threshold: 300 seconds <defaulted>
red-threshold: 600 seconds <defaulted>
-----------------------------------------------
global-correlation-policy
-----------------------------------------------
enable: true <defaulted>
yellow-threshold: 86400 seconds <protected>
red-threshold: 259200 seconds <protected>
-----------------------------------------------
network-participation-policy
-----------------------------------------------
enable: false <defaulted>
yellow-threshold: 1 connection failures <protected>
red-threshold: 6 connection failures <protected>
-----------------------------------------------
sensor(config-hea)# exit
sensor(config)# exit
sensor# exit
Step 9 Display the current configuration of the service host submode.
sensor# configure terminal
sensor(config)# service host
sensor(config-hos)# show settings
network-settings
-----------------------------------------------
host-ip: 192.0.2.0/24,192.0.2.17 default: 192.168.1.2/24,192.168.1.1
host-name: sensor default: sensor
telnet-option: enabled default: disabled
access-list (min: 0, max: 512, current: 2)
-----------------------------------------------
network-address: 10.0.0.0/8
-----------------------------------------------