Filter
Top Products
17-52
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 17 Administrative Tasks for the Sensor
Displaying Submode Settings
Displaying Submode Settings
Use the show settings [terse] command in any submode to view the contents of the current
configuration.
To display the current configuration settings for a submode, follow these steps:
Step 1 Log in to the CLI.
Step 2 Show the current configuration for ARC submode.
sensor# configure terminal
sensor (config)# service network-access
sensor (config-net)# show settings
general
-----------------------------------------------
log-all-block-events-and-errors: true <defaulted>
enable-nvram-write: false <defaulted>
enable-acl-logging: false <defaulted>
allow-sensor-block: false <defaulted>
block-enable: true <defaulted>
block-max-entries: 250 <defaulted>
max-interfaces: 250 default: 250
master-blocking-sensors (min: 0, max: 100, current: 0)
-----------------------------------------------
-----------------------------------------------
never-block-hosts (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
never-block-networks (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
block-hosts (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
block-networks (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
user-profiles (min: 0, max: 250, current: 11)
-----------------------------------------------
profile-name: 2admin
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: pix default:
-----------------------------------------------
profile-name: r7200
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: netrangr default:
-----------------------------------------------
profile-name: insidePix
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: <defaulted>
-----------------------------------------------
profile-name: qatest
-----------------------------------------------
enable-password: <hidden>