Filter
Top Products
5-24
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 5 Configuring Interfaces
Configuring Inline Interface Mode
description: <defaulted>
admin-state: enabled default: disabled
duplex: auto <defaulted>
speed: auto <defaulted>
default-vlan: 0 <defaulted>
alt-tcp-reset-interface
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
subinterface-type
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
<protected entry>
name: GigabitEthernet0/2 <defaulted>
-----------------------------------------------
media-type: tx <protected>
description: <defaulted>
admin-state: disabled <defaulted>
duplex: auto <defaulted>
speed: auto <defaulted>
default-vlan: 0 <defaulted>
alt-tcp-reset-interface
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
subinterface-type
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
<protected entry>
name: GigabitEthernet0/3 <defaulted>
-----------------------------------------------
media-type: tx <protected>
--MORE--
Step 12 Delete an inline interface pair and return the interfaces to promiscuous mode. You must also delete the
inline interface pair from the virtual sensor to which it is assigned.
sensor(config-int)# no inline-interfaces PAIR1
Step 13 Verify the inline interface pair has been deleted.
sensor(config-int)# show settings
-----------------------------------------------
command-control: Management0/0 <protected>
inline-interfaces (min: 0, max: 999999999, current: 0)
-----------------------------------------------
-----------------------------------------------
bypass-mode: auto <defaulted>
interface-notifications
-----------------------------------------------