Filter
Top Products
16-14
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 16 Working With Configuration Files
Displaying the Current Submode Configuration
max-interfaces: 250 <defaulted>
rate-limit-max-entries: 250 <defaulted>
master-blocking-sensors (min: 0, max: 100, current: 0)
-----------------------------------------------
-----------------------------------------------
never-block-hosts (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
never-block-networks (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
block-hosts (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
block-networks (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
user-profiles (min: 0, max: 250, current: 1)
-----------------------------------------------
profile-name: test
-----------------------------------------------
enable-password: <hidden>
password: <hidden>
username: <defaulted>
-----------------------------------------------
-----------------------------------------------
cat6k-devices (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
router-devices (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
firewall-devices (min: 0, max: 250, current: 0)
-----------------------------------------------
-----------------------------------------------
sensor(config-net)# exit
sensor(config)# exit
sensor#
Step 13 Display the current configuration for the notification submode.
sensor# configure terminal
sensor(config)# service notification
sensor(config-not)# show settings
trap-destinations (min: 0, max: 10, current: 0)
-----------------------------------------------
-----------------------------------------------
error-filter: error|fatal <defaulted>
enable-detail-traps: false <defaulted>
enable-notifications: false <defaulted>
enable-set-get: false <defaulted>
snmp-agent-port: 161 <defaulted>
snmp-agent-protocol: udp <defaulted>
read-only-community: public <defaulted>
read-write-community: private <defaulted>
trap-community-name: public <defaulted>
system-location: Unknown <defaulted>
system-contact: Unknown <defaulted>
sensor(config-not)# exit
sensor(config)# exit
sensor#