Filter
Top Products
4-40
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 4 Setting Up the Sensor
Configuring Time
-----------------------------------------------
sensor(config-hos-non-sta)#
Step 5 Enter end summertime submode.
sensor(config-hos-non-sta)# exit
sensor(config-hos-non)# end-summertime
Step 6 Configure the end summertime parameters:
a. Enter the date you want to end summertime settings. The format is yyyy-mm-dd.
sensor(config-hos-non-end)# date 2004-10-31
b. Enter the time you want to end summertime settings. The format is hh:mm:ss.
sensor(config-hos-non-end)# time 12:00:00
c. Verify your settings.
sensor(config-hos-non-end)# show settings
end-summertime
-----------------------------------------------
date: 2004-10-31
time: 12:00:00
-----------------------------------------------
sensor(config-hos-non-end)#
Step 7 Specify the local time zone used during summertime.
sensor(config-hos-non-end)# exit
sensor(config-hos-non)# summertime-zone-name CDT
Step 8 Specify the offset.
sensor(config-hos-non)# offset 60
Step 9 Verify your settings.
sensor(config-hos-non)# show settings
non-recurring
-----------------------------------------------
offset: 60 minutes default: 60
summertime-zone-name: CDT
start-summertime
-----------------------------------------------
date: 2004-05-15
time: 12:00:00
-----------------------------------------------
end-summertime
-----------------------------------------------
date: 2004-10-31
time: 12:00:00
-----------------------------------------------
-----------------------------------------------
sensor(config-hos-non)#
Step 10 Exit non-recurring summertime submode.
sensor(config-hos-non)# exit
sensor(config-hos)# exit
Apply Changes:?[yes]:
Step 11 Press Enter to apply the changes or enter no to discard them.