14-34
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 14 Configuring Attack Response Controller for Blocking and Rate Limiting
Obtaining a List of Blocked Hosts and Connections
IP = 10.1.1.1
NATAddr = 0.0.0.0
Communications = telnet
BlockInterface
InterfaceName = fa0/0
InterfaceDirection = in
State
BlockEnable = true
NetDevice
IP = 10.1.1.1
AclSupport = uses Named ACLs
Version = 12.2
State = Active
BlockedAddr
Host
IP = 192.168.1.1
Vlan =
ActualIp =
BlockMinutes = 80
MinutesRemaining = 76