Filter
Top Products
16-12
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 16 Working With Configuration Files
Displaying the Current Submode Configuration
-----------------------------------------------
media-type: xl <protected>
description: <defaulted>
admin-state: disabled <defaulted>
duplex: auto <defaulted>
speed: auto <defaulted>
alt-tcp-reset-interface
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
subinterface-type
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
<protected entry>
name: GigabitEthernet2/1 <defaulted>
-----------------------------------------------
media-type: xl <protected>
description: <defaulted>
admin-state: disabled <defaulted>
duplex: auto <defaulted>
speed: auto <defaulted>
alt-tcp-reset-interface
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
subinterface-type
-----------------------------------------------
none
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
-----------------------------------------------
command-control: GigabitEthernet0/1 <protected>
inline-interfaces (min: 0, max: 999999999, current: 0)
-----------------------------------------------
-----------------------------------------------
bypass-mode: auto <defaulted>
interface-notifications
-----------------------------------------------
missed-percentage-threshold: 0 percent <defaulted>
notification-interval: 30 seconds <defaulted>
idle-interface-delay: 30 seconds <defaulted>
-----------------------------------------------
sensor(config-int)# exit
sensor(config)# exit
sensor#
Step 11 Display the current configuration for the service logger submode.
sensor# configure terminal
sensor(config)# service logger
sensor(config-log)# show settings
master-control
-----------------------------------------------
enable-debug: false <defaulted>