Filter
Top Products
17-20
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 17 Administrative Tasks for the Sensor
Showing Sensor Overall Health Status
-----------------------------------------------
interface-down-policy
-----------------------------------------------
enable: true default: true
status: yellow default: red
-----------------------------------------------
inspection-load-policy
-----------------------------------------------
enable: true default: true
yellow-threshold: 50 percent default: 80
red-threshold: 100 percent default: 91
-----------------------------------------------
missed-packet-policy
-----------------------------------------------
enable: true default: true
yellow-threshold: 20 percent default: 1
red-threshold: 50 percent default: 6
-----------------------------------------------
memory-usage-policy
-----------------------------------------------
enable: true default: false
yellow-threshold: 50 percent default: 80
red-threshold: 100 percent default: 91
-----------------------------------------------
signature-update-policy
-----------------------------------------------
enable: true default: true
yellow-threshold: 10000 days default: 30
red-threshold: 30000 days default: 60
-----------------------------------------------
license-expiration-policy
-----------------------------------------------
enable: true default: true
yellow-threshold: 200000 days default: 30
red-threshold: 400000 days default: 0
-----------------------------------------------
event-retrieval-policy
-----------------------------------------------
enable: true <defaulted>
yellow-threshold: 100000 seconds default: 300
red-threshold: 100 seconds default: 600
-----------------------------------------------
sensor(config-hea)#
Step 17 Exit health monitoring submode.
sensor(config-hea)# exit
Apply Changes:?[yes]:
Step 18 Press Enter to apply the changes or enter no to discard them.
Showing Sensor Overall Health Status
Caution When the sensor is first starting, it is normal for certain health metric statuses to be red until the sensor
is fully up and running.