Filter
Top Products
16-8
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 16 Working With Configuration Files
Displaying the Current Submode Configuration
global-metaevent-status: Enabled <defaulted>
global-deny-timeout: 3600 <defaulted>
global-block-timeout: 30 <defaulted>
max-denied-attackers: 10000 <defaulted>
-----------------------------------------------
target-value (min: 0, max: 5, current: 0)
-----------------------------------------------
-----------------------------------------------
sensor(config-rul)# exit
sensor(config)# exit
sensor# exit
Step 6 Display the current configuration of the external product interface submode.
sensor(config)# service external-product-interface
sensor(config-ext)# show settings
cisco-security-agents-mc-settings (min: 0, max: 2, current: 0)
-----------------------------------------------
-----------------------------------------------
sensor(config-ext)# exit
sensor(config)# exit
sensor#
Step 7 Display the current configuration of the service global-correlation submode.
sensor# configure terminal
sensor(config)# service global-correlation
sensor(config-glo)# show settings
network-participation: off <defaulted>
global-correlation-inspection: on <defaulted>
global-correlation-inspection-influence: standard <defaulted>
reputation-filtering: on <defaulted>
test-global-correlation: off <defaulted>
sensor(config-glo)# exit
sensor(config)# exit
sensor# exit
Step 8 Display the current configuration of the service health-monitor submode.
sensor# configure terminal
sensor(config)# service health-monitor
sensor(config-hea)# show settings
enable-monitoring: true <defaulted>
persist-security-status: 5 minutes <defaulted>
heartbeat-events
-----------------------------------------------
enable: 300 seconds <defaulted>
-----------------------------------------------
application-failure-policy
-----------------------------------------------
enable: true <defaulted>
status: red <defaulted>
-----------------------------------------------
bypass-policy
-----------------------------------------------
enable: true <defaulted>
status: red <defaulted>
-----------------------------------------------
interface-down-policy
-----------------------------------------------
enable: true <defaulted>
status: red <defaulted>
-----------------------------------------------
inspection-load-policy
-----------------------------------------------