Filter
Top Products
5-44
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 5 Configuring Interfaces
Displaying Interface Statistics
Step 4 Display the statistics for a specific interface.
sensor# show interfaces Management0/0
MAC statistics from interface Management0/0
Interface function = Command-control interface
Description =
Media Type = TX
Default Vlan = 0
Link Status = Up
Link Speed = Auto_100
Link Duplex = Auto_Full
Total Packets Received = 4305909
Total Bytes Received = 280475712
Total Multicast Packets Received = 0
Total Receive Errors = 0
Total Receive FIFO Overruns = 0
Total Packets Transmitted = 973627
Total Bytes Transmitted = 437632618
Total Transmit Errors = 0
Total Transmit FIFO Overruns = 0
sensor#
Step 5 Clear the statistics.
sensor# show interfaces clear
Interface Statistics
Total Packets Received = 0
Total Bytes Received = 0
Missed Packet Percentage = 0
Current Bypass Mode = Auto_off
MAC statistics from interface GigabitEthernet0/0
Statistics From Subinterface 12
Vlans in this group = 12
Total Packets Received On This Vlan Group = 0
Total Bytes Received On This Vlan Group = 0
Total Packets Transmitted On This Vlan Group = 0
Total Bytes Transmitted On This Vlan Group = 0
Statistics From Subinterface 16
Vlans in this group = 10
Total Packets Received On This Vlan Group = 0
Total Bytes Received On This Vlan Group = 0
Total Packets Transmitted On This Vlan Group = 0
Total Bytes Transmitted On This Vlan Group = 0
Statistics From Subinterface 25
Vlans in this group = 11
Total Packets Received On This Vlan Group = 0
Total Bytes Received On This Vlan Group = 0
Total Packets Transmitted On This Vlan Group = 0
Total Bytes Transmitted On This Vlan Group = 0
--MORE--
ì
For More Information
For information on slot and port numbers and which platforms have a Management port, refer to Cisco
Intrusion Prevention System Appliances and Modules Installation Guide for IPS 7.1.