Filter
Top Products
17-37
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 17 Administrative Tasks for the Sensor
Displaying Statistics
Memory Usage
usedBytes = 1889357824
freeBytes = 2210988032
totalBytes = 4100345856
CPU Statistics
Note: CPU Usage statistics are not a good indication of the sensor processin load. The
Inspection Load Percentage in the output of 'show inspection-load' should be used instead.
Usage over last 5 seconds = 0
Usage over last minute = 2
Usage over last 5 minutes = 2
Usage over last 5 seconds = 0
Usage over last minute = 1
Usage over last 5 minutes = 1
Memory Statistics
Memory usage (bytes) = 1889357824
Memory free (bytes) = 2210988032
Auto Update Statistics
lastDirectoryReadAttempt = N/A
lastDownloadAttempt = N/A
lastInstallAttempt = N/A
nextAttempt = N/A
Auxilliary Processors Installed
sensor#
Step 10 Display the statistics for the logging application.
sensor# show statistics logger
The number of Log interprocessor FIFO overruns = 0
The number of syslog messages received = 11
The number of <evError> events written to the event store by severity
Fatal Severity = 0
Error Severity = 64
Warning Severity = 35
TOTAL = 99
The number of log messages written to the message log by severity
Fatal Severity = 0
Error Severity = 64
Warning Severity = 24
Timing Severity = 311
Debug Severity = 31522
Unknown Severity = 7
TOTAL = 31928
sensor#
Step 11 Display the statistics for the ARC.
sensor# show statistics network-access
Current Configuration
LogAllBlockEventsAndSensors = true
EnableNvramWrite = false
EnableAclLogging = false
AllowSensorBlock = false
BlockMaxEntries = 11
MaxDeviceInterfaces = 250
NetDevice
Type = PIX
IP = 10.89.150.171
NATAddr = 0.0.0.0
Communications = ssh-3des
NetDevice
Type = PIX
IP = 192.0.2.4
NATAddr = 0.0.0.0
Communications = ssh-3des