Filter
Top Products
CHAPTER
16-1
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
16
Working With Configuration Files
This chapter describes how to use commands that show, copy, and erase the configuration file. It contains
the following sections:
• Displaying the Current Configuration, page 16-1
• Displaying the Current Submode Configuration, page 16-3
• Filtering the Current Configuration Output, page 16-16
• Filtering the Current Submode Configuration Output, page 16-18
• Displaying the Contents of a Logical File, page 16-19
• Backing Up and Restoring the Configuration File Using a Remote Server, page 16-21
• Creating and Using a Backup Configuration File, page 16-23
• Erasing the Configuration File, page 16-23
Displaying the Current Configuration
Note The CLI output is an example of what your configuration may look like. It will not match exactly due to
the optional setup choices, sensor model, and IPS 7.1 version you have installed.
Use the show configuration or the more current-config command to display the contents of the current
configuration. To display the contents of the current configuration, follow these steps:
Step 1 Log in to the CLI.
Step 2 Display the current configuration.
sensor# show configuration
! ------------------------------
! Current configuration last modified Fri Apr 10 13:29:06 2010
! ------------------------------
! Version 7.1(1)
! Host:
! Realm Keys key1.0
! Signature Definition:
! Signature Update S383.0 2009-02-20
! Virus Update V1.4 2007-03-02
! ------------------------------
service interface