Cisco Systems IPS 7.1 Home Security System User Manual


  Open as PDF
of 1042
 
5-43
Cisco Intrusion Prevention System CLI Sensor Configuration Guide for IPS 7.1
OL-19892-01
Chapter 5 Configuring Interfaces
Displaying Interface Statistics
The following options apply:
clear—(Optional) Clears the diagnostics.
brief—(Optional) Displays a summary of the usability status information for each interface.
FastEthernet—Displays statistics for FastEthernet interfaces.
GigabitEthernet—Displays statistics for GigabitEthernet interfaces.
Management—Displays statistics for Management interfaces.
Note Only platforms with external ports marked Management support this keyword.
PortChannel—Displays statistics for PortChannel interfaces
slot/port—Displays statistics for the specific slot/port of the interface.
To display interface statistics, follow these steps:
Step 1 Log in to the CLI.
Step 2 Display statistics for all interfaces.
sensor# show interfaces
Interface Statistics
Total Packets Received = 0
Total Bytes Received = 0
Missed Packet Percentage = 0
Current Bypass Mode = Auto_off
MAC statistics from interface GigabitEthernet0/0
Statistics From Subinterface 12
Vlans in this group = 12
Total Packets Received On This Vlan Group = 0
Total Bytes Received On This Vlan Group = 0
Total Packets Transmitted On This Vlan Group = 0
Total Bytes Transmitted On This Vlan Group = 0
Statistics From Subinterface 16
Vlans in this group = 10
Total Packets Received On This Vlan Group = 0
Total Bytes Received On This Vlan Group = 0
Total Packets Transmitted On This Vlan Group = 0
Total Bytes Transmitted On This Vlan Group = 0
Statistics From Subinterface 25
Vlans in this group = 11
Total Packets Received On This Vlan Group = 0
Total Bytes Received On This Vlan Group = 0
Total Packets Transmitted On This Vlan Group = 0
Total Bytes Transmitted On This Vlan Group = 0
--MORE--
Step 3 Show a brief summary of the interfaces. The * indicates that the interface is the command and control
interface.
sensor# show interfaces brief
CC Interface Sensing State Link Inline Mode Pair Status
GigabitEthernet0/0 Disabled Down Unpaired N/A
* Management0/0 Disabled Up
GigabitEthernet0/1 Disabled Down Unpaired N/A
GigabitEthernet0/2 Disabled Down Unpaired N/A
GigabitEthernet0/3 Disabled Down Unpaired N/A
sensor#