Filter
Top Products
86 | Accessories for Control Panels and Keypads | Interface Modules
Australia A-Tick
Canada IC
USA FCC Part 15 Radiated/Conducted Emissions
Note FM approval applies when the C900V2 is used
with the Conettix D6600 Communications
Receiver/Gateway.
Installation/Configuration Notes
Compatibility Information
Numerous UL Listed Fire Alarm Control Panels (FACPs)
have proven compatible with the C900V2. For a complete
list, refer to the Network Dialer Capture Module C900V2
Compatibility List (F01U010036).
Technical Specifications
Connectors
Control Panel: RJ-45 Modular Jack
Telco: RJ-45 Modular Jack
LAN/WAN: RJ-45 Modular Jack
Ethernet Cable: Unshielded twisted pair 100 m (328 ft)
For 10BASE-T, use Category 3 or better.
For 100BASE-T, use Category 5 or better.
Environmental Considerations
Temperature (Operating): 0°C to +49°C (+32°F to +120°F)
Indicators
Module Status LEDs: 2 dual-colored
Module
Dimensions: 17.8 cm x 11.4 cm
(7 in. x 4.5 in.)
Interface: IEEE 802.3
Power Requirements
Current (Maximum): 280 mA
Voltage Range: 12 VDC to 24 VDC nominal
Alarm Outputs: Normally-open (NO) dry contacts
Protocols
Output To LAN or WAN: UDP/IP packets
Ordering Information
Conettix C900V2 Dialer Capture Ethernet
Module
Compatible with control panels using a stand-
ard digital dialer format. Provides end-to-end
security. Allows digital dialer control panels to
work over an IP network (such as LAN, WAN,
or the Internet).
C900V2
Accessories
AE1 Standard Enclosure (Gray)
Standard gray enclosure with keyed lock.
Measures 35.6 cm x 31.8 cm x 7.6 cm (14 in.
x 12.5 in. x 3 in.).
AE1
Bosch Security Systems B.V. www.boschsecurity.com
2