Filter
Top Products
122 | Arming Devices | Conventional
SE 100 GLT SmartKey
Arming Device
Features
▶
The arming device is programmable via the control
panel
▶
Suitable for various types of doors
▶
High security through “Challenge & Response”
procedure
▶
No manipulation or tampering possible
The SmartKey arming device is a system solution for
arming/disarming intrusion alarm systems.
System Overview
1 SPE blocking element
2 SE 100 GLT control unit
3 Bolt contact
4 Reader
5 SmartKey keys
Functions
The individual components of the system can be put
together as required for the intended usage. The SE 100
GLT can be operated with or without the blocking element.
SE 100 GLT
The SE 100 conventional (GLT) control unit processes the
status reports of all components in the system,
communicates these reports to the intrusion alarm system
and controls the blocking element. The control unit is
mounted in the secure area.
Reader
Arming and disarming is done using an electronic key on the
reader. LED and buzzer provide information about the
status of the system as well as operation. The reader can be
surface mounted or flush mounted (outside the secure
area).
Keys with a security card
The system operates like a locking device. The key kit
consists of a set number of valid keys and a security card.
The control unit is initialized using the security card, and
accepts only the keys of the key kit. To order additional
keys, the security card must be sent to the manufacturer
together with the order. The keys are labeled with a
consecutive key number, a security card number and an 8-
digit identification number.
Standard key (without security card)
The keys are not numbered and can be read in as often as
required. The keys are labeled with an 8-digit identification
number.
SPE blocking element
The SPE blocking element is an additional lock for the door
and is intended to prevent unauthorized entry to the armed
area. The blocking element must always be mounted in the
secure area with a kit to allow it to be fitted out for different
door types. The SE 100 GLT can be operated with or
without the blocking element.
A conventional bolt contact can be connected to the control
unit (not part of the scope of delivery).
A conventional standard magnet contact can be connected
to the control unit (not part of the scope of delivery).
Certifications and Approvals
Region Certification
Europe CE SE 100 GLT
SmartKey
Germany VdS G 106067, C SE 100 GLT
Installation/Configuration Notes
•
A maximum of 16 SmartKey keys per system can be
used. The keys are read in at the reader.
Bosch Security Systems B.V. www.boschsecurity.com
4