Filter
Top Products
Software | Programming Software | 117
Reduced Liability
The supported control panels maintain all local functionality
while remote programming sessions are in progress. No
indication of remote program access is visible from the
keypad. The control panel can still be armed, disarmed,
bypassed with all alarm sounders operational. Your liability
is limited since remote programming sessions will not result
in lengthy periods of panel in-operation that could result in
delayed response to emergencies. An alarm that occurs
while the remote programmer is on-line will automatically
stop and disconnect the remote programming session and
report the alarm to central station.
Remote Diagnostics
Gives the ability to:
•
Upload and view the control panel history and see zone
status in real time
•
See all troubles
•
Remote trouble reset and battery test and remote
smoke reset and total system reset
•
Remotely see and change alarm outputs and relay states
•
Remote EEPROM re-initialization
Report Capability
Provides the ability to print reports of history and general
account information to a standard printer, to a disk file, or
to a window. Reports can be for a single account or a group
of accounts. History reports can be selected by the type of
event such as all alarms or all supervisory events.
Template Files
The WDSRP System also simplifies account maintenance
through the use of Template Files. Each WDSRP system can
have 100 template files that store the common
characteristics of similar accounts. Changing any item in the
template file will automatically change the database of all
accounts that reference it. For example, many systems
share the same information as central station phone
numbers, reporting formats, bell timers, etc. A template can
be created which contains these values. Subsequent
accounts created using the template would automatically
have this information. To set up a new account, the
programmer would have to enter only the information that
was specific to each account such as user codes and zone
configuration.
Unattended Service
WDSRP gives you the timesaving convenience of
unattended service changes, so you do not have to chain
your most valuable service person to a computer screen.
Simply make program changes to the account in the WDSRP
database. WDSRP software can receive calls unattended so
your changes will be made automatically the next time the
control panel "calls in."
Technical Specifications
Free Hard Disk Space 10 MB
Modems IBM PC/Hayes Smartmodem (300,
1200, 1200B, 2400, or 2400B)
Operating System Microsoft Windows 3.1 with DOS ver-
sion 5.0 or higher, Windows 95, Win-
dows 98, or Windows 2000.
Processor 486DX or greater
RAM 8 MB
Video A VGA or better monitor.
Operator Input Mouse or other pointing device.
Trademarks
Microsoft
®
and Windows
®
are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
Pentium
®
is a registered trademark of Intel Corporation or its subsidiaries
in the United States and other countries.
Ordering Information
WDSRP Remote Programming
Software for Windows
Remote programming software for control
panels.
WDSRP/3
www.boschsecurity.com Bosch Security Systems B.V.
3