Filter
Top Products
216 | Detectors and Accessories | Glass Break
DS1100i Series Glassbreak
Detectors
Features
▶
Microprocessor-based SAT
▶
Automatic environmental test circuitry
▶
Sound check
▶
Multiple enclosure designs
The DS1100i Detector Series uses microprocessor-based
sound analysis technology (SAT) to listen for the specific
frequencies associated with breaking glass. The DS1101i,
DS1108i, DS1102i, and DS1103i can be used to detect
breakage of plate, tempered, laminated and wired glass
types. A built-in environmental test feature alerts the
installer to false alarm hazards in harsh environments.
Several cover designs are available.
Functions
Signal Processing
Audio signals are analyzed using microprocessor-based SAT
and must produce specific frequency, signature, and timing
relationships to cause an alarm. The sophistication of this
processing technique insures proper catch performance
while eliminating false alarms.
Test Features
The magnet operated test mode provides a location
verification and operational test when using the optional
DS1110i glassbreak tester. The test mode also includes an
environmental test that alerts the installer to possible false
alarm sources caused by ambient noise. Automatic sound
check feature allows the end user to verify that the detector
is powered and functioning by clapping his hands.
Externally visible alarm LED indicates an alarm or test
condition and can be programmed to latch if desired.
Certifications and Approvals
Region Certification
Europe CE DS1103i: 89/336/EEC, EN55022: 1998
+A1: 2000 +A2: 2003, EN50130-4: 1996
+A1: 1998 +A2: 2003, EN61000-4-2:
1995 +A1: 1998 +A2: 2001,
EN61000-4-3: 2002 +A1: 2003,
EN61000-4-4: 1995 +A1: 2000 +A2:
2001, EN61000-4-5: 1995 +A1: 2001,
EN61000-4-6: 1996 +A1: 2001 +A2:
2001, EN61000-4-11: 1994 +A1: 2001,
EN60950-1: 2001 +A11: 2004
DS1101i, DS1102i, DS1108i: 89/336/
EEC, EN55022: 1998 +A1: 2000 +A2:
2003, EN50130-4: 1996 +A1: 1998 +A2:
2003, EN61000-4-2: 1995 +A1: 1998
+A2: 2001, EN61000-4-3: 2002 +A1:
2003, EN61000-4-4: 1995 +A1: 2000
+A2: 2001, EN61000-4-5: 1995 +A1:
2001, EN61000-4-6: 1996 +A1: 2001
+A2: 2001, EN61000-4-11: 1994 +A1:
2001, EN60950-1: 2001 +A11: 2004
USA UL DS1101i, DS1102i, DS1103i: ANSR:
Intrusion Detection Units (UL639),
ANSR7: Intrusion Detection Units Certified
for Canada (cULus)
DS1108i: ANSR: Intrusion Detection Units
(UL639)
China CCC DS1101i-CHI and DS1102i-CHI:
2005013901000139
Installation/Configuration Notes
Note Glassbreak detectors are intended only as a
component of a perimeter protection system.
They should always be used in conjunction
with motion sensors.
Mounting
Mount the DS1100i detector on the ceiling, or on the wall
opposite or adjacent to the window. Coverage depends on
room acoustics and window size.
Standard Coverage
7.6 m (25 ft) for glass sizes over 30.5 cm x 30.5 cm
(12 in. x 12 in.).
Bosch Security Systems B.V. www.boschsecurity.com
5