Filter
Top Products
Control Panels, Control Centers, and Keypads | 7000 Line | 39
Eight On-board Zones
The DS7220V2 Control Panel has eight on-board zones. It
can have hard-wired expanded zones and wireless zones.
Program any of these zones to follow one of 15 zone
functions.
The DS7220V2 Control Panel also allows configuration
using two resistors for each sensor loop. The control panel
monitors two zones for each sensor loop, making 16 on-
board zones available. Zone doubling is also available on
hard-wired expanded zones.
When programming zones for entry or exit delay times, you
can choose a longer delay time for zones located a longer
distance from the keypad.
Authority Levels and PINs
The system supports 32 Personal Identification Numbers
(PIN). The PIN default is four digits, but can range between
three and seven digits. Designate an unlimited number of
master PINs. Use the master PINs to reprogram existing
PINs. Program PINs using up to four different authority
levels, which can restrict the PIN from bypassing, testing,
and disarming the system.
Locally or Remotely Programmable
The system is completely keypad programmable (DS7447E
or DS7447V2 Keypad required). An Installer's Keypad
feature is also available that allows quick access to the
programming menu.
Remote Programming Software (RPS) is a Windows
®
-based
account management and panel programming and
diagnostic utility. It is designed to remotely (or locally using
the DX4010i Aux Data pins) set up and program the
DS7220V2 Control Panels.
LED and LCD Keypad Support
Keypad Description
DS7445i LED Keypad
DS7445V2 LED Keypad
Provide 16 operating LEDs, and eight system
status LEDs that indicate conditions such as
armed, fire alarm, and trouble.
DS7446KP LCD Keypad
DS7447E LCD Keypad
DS7447V2 LCD Keypad
Two-line displays allow custom zone and area
descriptions up to 16 characters. The end
user can adjust the sounder volume and back-
light intensity using easy button commands.
LED and LCD keypads can be used in the same DS7220V2
Control Panel system.
PK32
The DS7220V2 Control Panel has an optional PK32
Programming Key that can copy one control panel's
programming to another control panel. This can be used as
an installer’s template. The installer could store a
residential template in one PK32 and a commercial
template in another PK32. The on-board LED illuminates
when information is sent to or from the key, and blinks
when functional diagnostics are performed on the key.
Flexible Digital Communications
The DS7220V2 Control Panel works with most alarm
receivers that support Contact ID and SIA 300 digital
communicator formats and pager format. The pager format
allows control panels to dial a digital pager service and
leave a numeric message representing the account number,
event number, area number, and zone or user number.
Network Communication Option
Adding a DX4020 Network Interface Module provides bi-
directional communications over an Ethernet network. The
network can also be used for both remote programming
sessions with RPS and central station (ARC) reporting.
Event History Log
A 254-event history log keeps a record of open and close
events, alarms, and troubles organized by time and date.
View the log information using the DS7447E and DS7447V2
LCD Keypads or RPS. The log also tracks the area, zone
(device), user, and communication information relevant to
each event. All 254 events are in non-volatile memory.
Scheduled Events (Skeds)
Skeds are programmed events that occur at a specific time
of day and day of week. These events include Auto On, Auto
Perimeter Only On, Auto Partial On, Auto Off and Sked
Output Function. Users can use the Extend Auto On Time
function to add an additional hour to the setting for Auto
On, Auto Perimeter Only On and Auto Partial On. Depending
on the assigned authority level, users can change a sked.
Eight skeds are available.
Fire Alarm Verification
The DS7220V2 Control Panel can automatically reset smoke
detectors after an initial alarm. If a second alarm occurs
within the verification window, an immediate fire alarm
results. This reduces potential false alarms, while still
providing fast response to an alarm.
Door Access Control Modules (DACMs)
A DACM grants or restricts access through a door using a
keypad, credential reader, Request-to-Exit (REX) input, or a
door contact. Each DACM replaces one system keypad and
supervises one door. The DACM can also function as a
stand-alone device.
Zones
The DS7220V2 Control Panel accepts up to 24 zones in any
combination of the available on-board zones, hard-wired
expanded zones, or wireless zones.
Areas
The DS7220V2 Control Panel can be divided into two
independently-configurable areas. Each area can have
separate keypads and a separate reporting ID.
Outputs
The DS7220V2 Control Panel has four on-board
programmable outputs that can be expanded up to 12.
PO 1: terminals can be configured as an alarm power
output. The default configuration for PO 1 makes it a dry
contact, Normally-Open (NO) relay.
www.boschsecurity.com Bosch Security Systems B.V.
1