Filter
Top Products
Control Panels, Control Centers, and Keypads | DS7080i | 35
DS7080iP32 Eight-zone
Control Panels
Features
▶
Keypad programmable
▶
Remotely programmable
▶
Custom-programmable alpha display
▶
Two partitions
▶
History buffer
▶
Auto arming
▶
24 PINs
The DS7080iP-32 Eight-zone Control Panels can be
partitioned, and expanded to 32 zones. They accept up to
24 Personal ID numbers (PINs), are keypad or remotely
programmable, support multiple languages, and have a
wide range of features.
Functions
Keypad Programmable
Uses the DS7447E or DS7447V2 liquid-crystal display (LCD)
keypads. There is no need for expensive hand-held
programmers.
Remotely Programmable
Uses a standard Hayes modem and WDSRP2 software for
Windows®, and a computer running Windows to program
remotely. Using an off-site computer to run diagnostics, arm
systems, and bypass zones reduces service visits.
Two Partitions
The DS7080iP-32 can be split into two partitions. Assign
users to one or both partitions. Program common zones to
allow users access to areas (foyers and entrance ways).
Partitions and common zones can be accessed by assigned
users from all keypads.
24 PINs
Supports 24 PINs in any combination of four or six digits.
Designate PINs as master PINs that can be used to
reprogram PINs. PINs can be programmed with seven levels
of authority and restricted from bypassing, testing, and
disarming the system.
100-event History Buffer
A 100-event history buffer, that can be read at the DS7447E
or DS7447V2 keypads or uploaded to the WDSRP2 Remote
Programming Software, tracks Open and Close, Alarm, and
Trouble events by time and date. The installer can program
which events are stored.
Eight Zones, Expandable to 32 Zones
The DS7080iP-32 accepts up to eight input zones. The
zones are flexible, and can be programmed to provide
different functions. Add up to 24 additional zones using EX8
expansion modules.
Answering Machine Override
This function is built into the DS7080iP-32 Control Panels.
No external hardware is required.
Anti-takeover Protection
All or part of the programming can be locked so the program
cannot be changed if someone attempts to takeover the
account.
Automatic Arming or Delayed Arming
Program an automatic arming time for each partition daily,
override automatic arm time, or specify a time for the panel
to arm.
Cross-zoning Control
Program zones to cause an alarm only when specific zone
pairs activate to reduce false alarms. Program cross-zoning
to cause an alarm when zones activate in sequence for
detecting the direction in which an intruder moved.
Custom Arming Configurations
Use different arming configurations to automatically bypass
a group of zones.
Easy Function-Key User Interface
•
Six labeled function keys eliminate the need for multi-
button commands. Enter a PIN followed by the function
key to perform functions such as arming, disarming, and
resetting smoke detectors.
•
The interface has easy to follow procedures. The
interface does not use cumbersome menu driven
formats, so expert users can quickly access the items
they need.
•
A programmable Quick Arm feature allows users to turn
the system on without a PIN; however, a PIN is needed
to turn off the system, silence alarms, or perform
system tests. Residential Mode requires a PIN to disarm
the system, silence alarms, and reset the system.
www.boschsecurity.com Bosch Security Systems B.V.
1