Filter
Top Products
Arming Devices | LSN | 131
SE 320 LSNi SmartKey
Arming Device
Features
▶
SmartKey code keypad can be used as a "coded arming
device" with integrated reader
▶
Code keypads can be used as a "coded arming device"
in conjunction with the reader
▶
The SmartKey code keypad with integrated reader can
also be connected as an autonomous code keypad.
▶
Blocking element connection options for vault doors
▶
Connection option for door opener relay
▶
Simple, non-contact operation
▶
High security through “Challenge & Response”
procedure
▶
Clear signaling prevents operational errors
▶
No manipulation or tampering possible
▶
Detailed logging of arming via the LSN control panel
The SE 320 LSNi SmartKey arming device with connectable
code keypad/reader or just with code keypad is a system
solution for arming/disarming intrusion alarm systems.
Arming/disarming is carried out by using the SmartKey key
then entering the user code.
The arming device meets BSI requirements.
System Overview
1 SPE blocking element
2 SE 320 LSNi control unit
3 Bolt contact
4 SmartKey keys
5 Code keypad with integrated reader
6 Code keypad (as autonomous code keypad)
7 Reader
8 Code keypad
9 LSN control panel
10 Door opener relay or blocking element for vault doors
Functions
Individual system components can be put together
depending on the usage conditions required. Further
connection options for blocking elements for vault doors
and door openers are possible. Operation modes with or
without the SPE blocking element are possible.
The SE 320 LSNi control unit processes the status reports
of all components in the system, communicates these
reports to the intrusion alarm system and controls the
blocking element. The control unit has a connection line for
connecting bolt contacts and two primary lines. The control
unit is mounted in the secure area.
SmartKey code keypad with integrated reader
The SmartKey code keypad with integrated reader
combines the function of the reader and the SmartKey code
keypad in one unit. Initial set-up and operation is the same
as with one reader + one code keypad.
The reader for the SmartKey key is located in the middle of
the unit (not visible from the outside). To operate, you hold
the SmartKey key in the middle of the SmartKey code
keypad (with integrated reader) at a maximum distance of
2 cm. The code keypad with integrated reader allows
arming and disarming of the intrusion alarm system only
after the correct combination of numbers has been entered
at the code keypad.
www.boschsecurity.com Bosch Security Systems B.V.
4