Bosch Appliances 8-Dec Home Security System User Manual


 
Control Panels, Control Centers, and Keypads | Solution Series | 25
Event Memory Recall
Event Memory Recall plays the last 40 system events,
including all alarms, system arming, and system disarming.
If the control panel is partitioned, Event Memory Recall
plays the last 10 system events.
End-Of-Line (EOL) Resistor Value Choice
Users can choose from different EOL resistor values when
programming the control panel. The selected value applies
to all eight programmable zones at once. Users can add a
control panel into an existing system without changing the
EOL resistors.
For 16 zones, use zone doubling or add an eight zone
expansion board. With zone doubling, zones one to eight
are 3 K3, and zones nine to 16 are 6 K8. The CC883 Eight
Zone Expansion Board supports adjustable EOL resistor
values.
Functions for CC880 Models
Call Forwarding
The telecommunications provider must offer a call
forwarding option. Users can program call forwarding
modes to operate when the system is armed in the AWAY
Mode.
Call Forward Modes
Immediate On: Redirects all incoming calls to another
number, including mobile phones, pagers, and
answering services. The telephone called first does not
ring.
No Answer: Redirects all incoming calls to another
number when the telephone that was called first is not
answered within 20 seconds. Outgoing calls can still be
made from the first telephone.
Functions for CC880PSP Models
Programmable Ring Burst Time
Telephone ring times might be longer or shorter depending
on the technology in a system. Different timing can cause
control panels to answer calls that should answered by an
answering machine, fax, or a person. Users can program the
control panel for the correct ring burst time. Adjust the ring
time from 0 ms to 1200 ms in 5 ms increments.
Certifications and Approvals
Region Certification
Europe CE
A-Tick Supplier Code N663
New Zealand Telepermit PTC 211/95/246
Installation/Configuration Notes
Compatibility Information
RF Receivers RE005E RF Receiver with Outputs
RF Transmitters RE012E Two-channel Hand-held Transmitter
RE013E Four-channel Hand-held Transmitter
Codepads
CP105A Night Arm Station
CP500AW LED Area Addressable
CP500ALW LCD Area Addressable
CP500PW LED Partitionable
CP516LW LCD
CP516W LED
Modules MO144 Universal Timer Module
Technical Specifications
Enclosure
Dimensions (case, packed in car-
ton):
30.6 cm x 26.2 cm x 8.4 cm
(12 in. x 10.3 in. x 3.3 in.)
Weight: 2.5 kg (5.5 lb)
Environmental Considerations
Relative Humidity: 10% to 95% non-condensing
Temperature Range: 0°C to +45°C (+32°F to +113°F)
Power Requirements
Current Draw (Stand-By): 65 mA
Current Draw (Alarm): 115 mA
Current Draw (with Codepad): 105 mA
Primary: 240 VAC to 18 VAC at 1.3 A from a
TF008 Plug Pack
Secondary: 12 VDC, 7 Ah from a rechargeable
sealed lead acid battery
Trademarks
MS-DOS
®
is a registered trademark of Microsoft Corporation in the United
States and/or other countries.
www.boschsecurity.com Bosch Security Systems B.V.
1