288 | Detectors and Accessories | Accessories
ISM‑BLA1‑LM Blue Line
Nightlight Module
Features
▶
Modular construction fits all Blue Line detectors
▶
High quality, affordable, and easy to install
▶
Exterior switches control light duration (short or long)
and on or off
▶
Two installer-selectable brightness levels
▶
Aesthetic design
The Blue Line ISM-BLA1-LM Nightlight Module attaches to
the Blue Line detectors. When the detector senses a
presence, the module's LEDs light and provide illumination
up to the equivalent of bright moonlight (0.1 cd at 30 cm
[1 ft] from the detector).
Functions
Unique Interface
The Blue Line Nightlight Module mounts on top of and is
wired to a Blue Line detector. This unique interface
between module and detector makes installation fast, easy,
and inexpensive. Once the detector is mounted and wired
to the control panel, you simply add the module with no
additional wiring needed.
Basic Operation
The nightlight module has a photo-sensor and four LEDs
under a diffusing lens. It mounts on, draws its power from,
and is controlled by any Blue Line detector. Once installed
and set, if the detector senses motion and the photo-sensor
does not detect light, the LEDs light.
Settings
Brightness
The brightness level can be set for low or high by positioning
a jumper during module installation.
Duration
The length of time the LEDs remain lit is set with an external
switch on the side of the module. Short duration is
approximately 20 sec to 30 sec; while long duration is
approximately 2 min to 4 min.
On-Off
Use the external On or Off switch on the side of the module
to determine if the LEDs light when motion is detected.
Field Testing
The module comes with a piece of black plastic for covering
the photo-sensor for field testing the module.
Certifications and Approvals
Region Certification
Europe CE 89/336/EEC, EN50130-4: 1996 +A1:
1998 +A2: 2003, EN61000-4-2: 1995
+A1: 1998 +A2: 2001, EN61000-4-3:
2002 +A1: 2002 +A2: 2005,
EN61000-4-4: 1995 +A1: 2000 +A2:
2001, EN61000-4-5: 1995 +A1: 2001,
EN61000-4-6: 1996 +A1: 2001 +A2:
2001 +A3: 2005, EN61000-4-11:1994
+A1: 2001
Russia GOST GOST 12997-84, GOST R 50009-2000,
GOST R 51317.3.2-99, GOST R
51317.3.3-99, GOST R MEK
60065-2002
USA UL ANSR: Intrusion Detection Units (UL639),
ANSR7: Intrusion Detection Units Certified
for Canada (cULus)
Belgium INCERT B-509-0009/a
Installation/Configuration Notes
Compatibility Information
The BLA1-LM Nightlight Module is compatible with the
following products:
Detectors BLD1 Blue Line TriTech® Detectors
BLD1-P Blue Line Pet Friendly® TriTech® Detectors
BLP1 Blue Line PIR Detector
BLP1-P Blue Line Pet Friendly® PIR Detector
BLQ1 Blue Line quad PIR Detector
Mounting Considerations
The nightlight module mounts on top of a Blue Line detector
by removing the detector from its mounting base, installing
the module on the detector base, and reattaching the
detector and the module lens. Ensure there is enough space
above the detector for the nightlight module.
Bosch Security Systems B.V. www.boschsecurity.com
5