Filter
Top Products
Control Panels, Control Centers, and Keypads | Easy Series | 3
Functions
Advanced False Alarm Reduction
The Easy Series Intrusion Control Panel system guards
against user-generated false alarms through design features
such as Graduated Annunciation and Intelligent Threat
Assessment. Easy Series uses enhanced false alarm
verification methods that exceed industry false alarm
reduction standards.
Graduated Annunciation
The system gradually increases the control center volume,
changes the animation of the control center display, and
incrementally pulses the warning devices. The control
center notifies users when the system is preparing to send
an alarm and provides options to cancel reports, reducing
false alarms.
Alarm Verification
The following alarm verification methods reduce false
alarms without compromising usability or reliability.
1. Two-way Audio Verification: Provides remote customers
the ability to listen to and speak with users at the
protected premises.
2. Sequential Verification: When two or more input
sensors activate within a specified time period, an
intrusion alarm is considered verified. For example, if a
door sensor and a motion detector both sense alarms,
the system sends a verified alarm report.
3. Intelligent Threat Assessment: The Easy Series Intrusion
Control Panel uses protection levels, input types, input
conditions, and system event timing to assess a
potential threat. If the threat reaches a specific
threshold, the system sends a verified alarm report.
Easy Series Intrusion Control Panel Configuration
Users can configure the Easy Series Intrusion Control Panel
with the necessary regional parameters for a specific
country without changing hardware. Installers can
configure the system using their language of choice and
then set the system to the appropriate language for the
user. Installers can remotely program the system using a
telephone or Remote Programming Software (RPS). A voice
prompted installer mode reduces service and installation
costs while ensuring accurate programming.
Remote Programming Software (RPS)
RPS is a separate software package that allows computers
equipped with the Microsoft Windows operating system
and a modem to act as a remote programming, record
storage, remote control, and troubleshooting tool for
specific control panels.
Certifications and Approvals
Region Certification
Europe CE 1999/5/EC, 2006/95/EC, 2004/108/
EC; EN 55022:2006 + A1:2007, Class B;
EN 50130-4 w/A1:1998 + A2:2003;
EN61000-3-2:2006;
EN61000-3-3:1995; EN 60950-1:2001;
TBR21:1998
Belgium INCERT B-509-0044/b
USA UL AMCX: Central Station Alarm Units
(UL1610, UL1635), AMCX7: Central
Station Alarm Units Certified for Canada
(cULus), AMTB: Control Panels, SIA False
Alarm Reduction, AOTX: Local Alarm Units
(UL464, UL609), AOTX7: Local Alarm
Units Certified for Canada (cULus), APAW:
Police Station Alarm Units (UL365,
UL464), APAW7: Police Station Alarm
Units Certified for Canada (cULus), APOU:
Proprietary Alarm Units (UL1076),
APOU7: Proprietary Alarm Units Certified
for Canada (cULus), NBSX: Household
Burglar Alarm System Units (UL1023),
NBSX7: Household Burglar Alarm System
Units Certified for Canada (cULus), UTOU:
Control Units and Accessories - Household
System Type (UL985), UTOU7: Control
Units and Accessories - Household System
Type Certified for Canada (cULus)
CSFM 7167-1615: 223 July 2008
Canada IC 1249A-EZM1
Sweden INTYG Nr08-423 Centralapparat
Nr08-424 Centralapparat-trådlös
Compliance with specific standards, such as SIA CP-01 and DD243, reduces
false alarms and is required in many locations. In addition to the certifications
and approvals listed above, the Easy Series Intrusion Control Panel is de-
signed to comply with the following certifications, approvals, and standards:
EN50131-1 Grade 2
DD243
PD6662
CCC
FCC
A-Tick
C-Tick
TBR21 for PSTN
Japan Approvals Institute for Telecommunications Equipment (JATE)
www.boschsecurity.com Bosch Security Systems B.V.
1