Filter
Top Products
Wireless Local Security Network (wLSN) | wLSN Peripherie | 447
wLSN PIR Motion Detector
Features
▶
First Step processing (FSP), flexible mounting options,
and temperature compensation
▶
Draft, insect, and pet and animal immunity
▶
Eight detection layers including look down zones
▶
Externally-visible LED indicates test status and RF
signal strength
▶
Determine suitability of chosen installation location
with RF Signal Strength (RFSS) mode
▶
Supervised for low-battery, cover-tamper, and wall-
tamper conditions
▶
Operates up to 5 years on readily-obtainable AA
batteries
The wLSN PIR Motion Detector has a dense zone pattern
with 79 zones in eight layers to provide superior catch
performance. Ease of installation and flexible mounting
options provide state-of-the-art detection every time.
Functions
First Step Processing
First Step Processing (FSP) allows virtually instant
response to human targets without sacrificing false alarm
immunity to other sources. By adjusting its sensitivity based
upon signal amplitude, polarity, slope and timing, FSP
eliminates the need for the installer to select the sensitivity
level for the application.
Pet and Animal Immunity
The detector is able to distinguish between signals caused
by humans and signals caused by one or two animals with
a combined total weight of 14 kg (31 lb). This provides
immunity to false alarms while maintaining proper catch
performance of human targets.
Draft and Insect Immunity
The sealed optical chamber provides immunity to drafts and
insects.
Temperature Compensation
Automatically monitors the ambient temperature and
adjusts the signal processing to maintain proper catch
performance in critical temperature ranges.
RF Signal Strength Mode
Removing the device cover and pressing the tamper switch
four times within 10 seconds of battery installation
activates the RF signal strength mode. The LED lights steady
for 5 sec and then begins to flash. A slow flash
(approximately 1 sec on, 1 sec off) indicates insufficient
signal reception. A quickly flashing LED (approximately five
times as fast as the slow flash) indicates the device is
receiving sufficient signal from the wLSN Hub.
Certifications and Approvals
Region Certification
Europe CE 1999/5/EC, IEC60950-1: 2001,
EN60950-1:2001 +A11:2004,
EN50130-4: 1996 +A1: 1998 +A2: 2003,
EN61000-4-2: 1995 +A1: 1998 +A2:
2001, EN61000-4-3: 2002 +A1: 2003
+A2: 2005, EN61000-4-4: 1995 +A1:
2001 +A2: 2001, EN61000-4-5: 1995
+A1: 2001, EN61000-4-6: 1996 +A1:
2001 +A2: 2001 +A3: 2005,
EN61000-4-11: 1994 +A1: 2001,
EN55022/ANSI C63.4: 2003, ETSI EN
300 220-1 V1.3.1: 2000-09, ETSI EN 301
489-1 V1.4.1: 2002-08, ETSI EN 301
489-3 V1.4.1: 2002-08
Belgium INCERT B-509-0055
Listings and Approvals:
X
Complies with: EN50131-1 Grade 2, Environmental class II
Installation/Configuration Notes
Compatibility Information
The wireless Local SecurityNetwork (wLSN) including the
wLSN PIR Motion Detector is compatible with the Easy
Series Control Panel.
www.boschsecurity.com Bosch Security Systems B.V.
8