Filter
Top Products
Conettix - Information Transport Solutions | Conettix - Receiver/Gateway | 395
Conettix D6100i Communi-
cations Receiver/Gateway
Features
▶
Up to 3200 accounts for local-area network (LAN) or
wide-area network (WAN) communications
▶
Two lines for public switched telephone network
(PSTN) communications
▶
Supports Caller ID
▶
NIST AES Certification for Network Communications
▶
Supports 128-bit AES Rijndael encryption
▶
Supports two-way audio
▶
Connects to an automation system, programming
software, and a printer
▶
Two programmable inputs and outputs
▶
Menu-driven keypad programming
▶
Large 2 x 40 character liquid crystal display (LCD)
The Conettix D6100i Communications Receiver/Gateway
provides alarm communications over:
•
Telephone line communications over the public
switched telephone network (PSTN).
•
Internet or intranet communications over a LAN or WAN
using standard user datagram protocol and internet
protocol (UDP/IP).
•
Simultaneous PSTN and LAN or WAN communications.
The D6100i has a compact, economical design that is well-
suited for applications such as small central stations, gated
communities, security offices, or university campuses. The
D6100i uses the same firmware and supports the same
major communication formats as the Conettix D6600
Communications Receiver/Gateway.
System Overview
PSTN Communications Configuration
This configuration uses existing telephone lines. A control
panel's signal transmits over a PSTN analog telephone line
to the D6100i. The receiver translates the signal to a
common data format and sends the signal through Ethernet
LAN, WAN, or RS-232 to a central station automation
system.
Internet or Intranet Communications Configuration
This configuration requires Conettix IP hardware
components, uses existing Internet or intranet structures,
and avoids additional telephone service costs. This
configuration permits the Conettix D6200 Programming/
Administration Software to connect to the D6100i remotely.
A control panel's signal transmits over the LAN or WAN to
the D6100i. The D6100i translates the signal to a common
data format and sends the signal through Ethernet LAN,
WAN, or RS-232 to a central station automation system. The
central automation system sends information to operator
work stations.
Conettix D6200 Programming/Administration Software
Conettix D6200 Programming/Administration Software is a
PC-based application that allows users to view, change,
upload, and download D6100i programming parameters
through Ethernet LAN, WAN, or RS-232 serial port. With the
Conettix D6200 Programming/Administration Software,
users can edit programming parameters and view the status
of the receiver.
Note Conettix D6200 Programming/Administration
Software works with the following operating
systems and associated service packs:
Microsoft Windows 98, Windows 98 Second
Edition, Windows Me, Windows NT, Windows
2000, and Windows XP.
www.boschsecurity.com Bosch Security Systems B.V.
7