Filter
Top Products
274 | Detectors and Accessories | Magnetic Contacts Surface Mount
ISN‑CFM‑106 Flange
Mount Contacts with
Center Leads
Features
▶
Closed loop
▶
Flange mount with special adhesive
▶
Center leads
▶
Clean break flange removal
The contacts are available in brown or white. Both models
are flange mountable with special adhesive and have leads
that come from the center of the contact. Both models have
a "clean break" flange removal.
Certifications and Approvals
UL and X
Region Certification
Europe CE 73/23/EEC and 93/68/EEC, EN50131:
1997, EN50131-6: 1997, EN60950:
2000, EN60335-1: 1994 +A1: 1996
Annex B
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
10 Contacts
10 Magnets
Technical Specifications
Specifications for All Models
Gap Width: 25 mm (1 in.)
Contact Dimensions: 7.62 mm x 33.78 mm x 13.46 mm (0.3
in. x 1.33 in. x 0.53 in.)
Wire Lead Type: 0.8 mm (0.029 in.) 22 AWG, 7 stranded
Wire Lead Length: 46 cm (18 in.)
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance:
10
10
Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage: 100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Package Information
ATTENTION! Each package contains ten contacts and ten magnets.
Ordering Information
Brown Flange Mount Contact with Center L
eads
Brown surface mount contact. Includes a
standard magnet and special adhesive. Pack-
age contains ten contacts and ten magnets.
ISN-CFM-106B
White Flange Mount Contact with Center L
eads
White surface mount contact. Includes a stand-
ard magnet and special adhesive. Package
contains ten contacts and ten magnets.
ISN-CFM-106W
Bosch Security Systems B.V. www.boschsecurity.com
5