Filter
Top Products
276 | Detectors and Accessories | Magnetic Contacts Surface Mount
ISN‑CMET‑200AR Commer-
cial Metal Contact
Features
▶
Closed loop
▶
Wide gap
▶
Ideal for commercial applications
The contact is available in a metal finish. Use for commercial
applications that need a wide gap.
Certifications and Approvals
UL and X
Region Certification
Europe CE 73/23/EEC and 93/68/EEC, EN50131:
1997, EN50131-6: 1997, EN60950:
2000, EN60335-1: 1994 +A1: 1996
Annex B
Installation/Configuration Notes
Compatibility Information
All contact models are compatible with control panel
models that accept contact inputs.
Parts Included
Quantity Per Package Component
1 Contact
1 Magnet
Technical Specifications
Gap Width: 31.75 mm (1.25 in.)
Contact Dimensions: 9.5 mm x 16 mm x 50.8 mm
(0.375 in. x 0.625 in. x 2 in.)
Cable Length: 46 cm (18 in.)
Switch Configuration Type: Single pole single throw (SPST)
Maximum Contact Resistance: 150 μΩ (micro-ohm)
Minimum Breakdown Voltage: 250 VDC
Insulation Resistance:
10
10
Ω
Electrostatic Cap: 0.3 PF
Contact Capacity: 10 VAC
Maximum Conductive Current: 1.0 A
Maximum Voltage: 100 V
Operating Temperature Range: 7.2°C to -95.56°C (-45°F to -140°F)
Package Information
ATTENTION! Each package contains one contact and one magnet.
Ordering Information
ISN‑CMET‑200AR Commercial
Metal Contact
Package contains one contact and one magnet.
ISN-CMET-200AR
Bosch Security Systems B.V. www.boschsecurity.com
5