Filter
Top Products
396 | Conettix - Information Transport Solutions | Conettix - Receiver/Gateway
1. Access Control
2. Commercial Monitoring
3. Residential Monitoring
4. PSTN
4.1 Two-way Audio
4.2 Private Branch Exchange (PBX)
4.3 Analog Telephone Lines
5. LAN/WAN
5.1 Firewall, Router, and Hub
5.2 LAN
6. Conettix D6100i Communications Receiver/Gateway 1
7. Conettix D6100i Communications Receiver/Gateway N
8. RS-232
9. Conettix D6200 Programming/Administration Software
10. Automation System
11. Central Station Operators
Functions
Communication Formats
•
Acron Superfast
•
ROBOFON
•
Ademco Slow
•
Scantronics Scancom
•
Ademco Express
•
SERIEE FSK/DTMF
•
Ademco High Speed
•
Sescoa Super Speed
•
Ademco Contact ID
•
SIA 8/20/300
•
CFSK BELL/V.21
•
SIA ADT
•
FBI Superfast
•
SIA V.21
•
Franklin/Sescoa
•
Silent Knight Fast
•
ITI
•
Silent Knight FSK
•
Radionics BFSK
•
Standard Pulse Formats
•
Radionics Hex
•
Sur-Gard DTMF
•
Radionics Modem II
•
Telim
•
Radionics Modem IIe/IIIa
2
•
Veritech FSK
PSTN Communications
•
Receives signals on two telephone lines simultaneously.
•
Independent, configurable communication format
settings for each telephone line.
•
Visual front panel light emitting diode (LED) indicators
for on-line and line-fault status conditions.
Two-way Audio
•
Able to transfer calls to another line or extension
•
Activated by account numbers and by events
Flash Technology
Using the Conettix D6200 Programming/Administration
Software, flash technology in the D6100i allows for
software upgrades without additional hardware or firmware
changes.
LAN or WAN Gateway Communications
•
Requires Conettix IP hardware components.
•
Two-way communications with a control panel.
•
Supervised network automation computer links.
•
Supports up to 3200 network accounts.
•
Ethernet configuration available.
•
Supports 128-bit AES Rijndael encryption.
Supervision and Programming with Network
Communications
The protected premises sends supervision messages to the
D6100i at a programmed rate. Users can program the
supervision rate to be 5 seconds to 1275 seconds. The
D6100i acknowledges the supervision message, providing
end-to-end security. If authentication and encryption
algorithms detect potentially damaging activity, they alert
the central station operator. The data network's
communication link is continuously supervised. Even when
monitoring thousands of control panels, the system
consumes only a small amount of bandwidth.
Certifications and Approvals
Region Certification
USA UL NOA under File BP6198 - AMCX: Central
Station Alarm Units (UL1610 and
UL1635); AMCX7: Central Station Alarm
Units Certified for Canada (cULus)
Bosch Security Systems B.V. www.boschsecurity.com
7