Filter
Top Products
126 | Arming Devices | LSN
SE 120 LSNi SmartKey
Arming Device
Features
▶
Simple, non-contact operation
▶
High security through “Challenge & Response”
procedure
▶
Clear signaling prevents operational errors
▶
No manipulation or tampering possible
▶
Detailed logging of arming via the LSN control panel
▶
The arming device is programmable via the control
panel
▶
Motorized block locking function: All blocking
elements for an area are engaged and disengaged
simultaneously.
▶
Suitable for various types of doors
The SmartKey arming device is a system solution for
arming/disarming intrusion alarm systems.
System Overview
1 SPE blocking element
2 SE 120 LSNi control unit
3 Bolt contact
4 Reader
5 SmartKey keys
6 LSN control panel
Functions
Individual system components can be put together
depending on the usage conditions required. Operation
modes with or without the SPE blocking element are
possible.
SE 120 LSNi
The SE 120 LSNi control unit processes the status reports
of all components in the system, communicates these
reports to the intrusion alarm system and controls the
blocking element. The control unit has a lock line for
connecting bolt contacts and two primary lines for
connecting e.g. magnet contacts. The control unit is
mounted in the secure area.
Reader
Arming and disarming is done using an electronic key on the
reader. LED and buzzer provide information about the
status of the system as well as operation. The reader can be
surface mounted or flush mounted (outside the secure
area).
Keys with a security card
The system operates like a locking device. The key kit
consists of a set number of valid keys and a security card.
The control unit is initialized using the security card, and
accepts only the keys of the key kit. To order additional
keys, the security card must be sent to the manufacturer
together with the order. The keys are labeled with a
consecutive key number, a security card number and an 8-
digit identification number.
Bosch Security Systems B.V. www.boschsecurity.com
4