Filter
Top Products
196 | Detectors and Accessories | Motion Ceiling Mount
DS9370 Series Panoramic
TriTech Detector
Features
▶
Up to 7.6 m (25 ft) mounting height
▶
Fully adjustable optics for coverage integrity and
customization
▶
Hinged chassis and base plate for easy installation
▶
High efficiency LED and light pipe system for easy walk
testing
▶
First Step processing (FSP)
▶
Microwave adaptive processing
▶
360° x 21 m (70 ft) diameter pattern
Each DS9370 Series TriTech
®
PIR/Microwave Detector
model is panoramic and uses several patented processing
techniques to provide excellent catch performance with
freedom from false alarms. Each model can be mounted on
ceilings as high as 7.6 m (25 ft). With three separate PIR
sections that are fully adjustable, the DS9370 Series
provides coverage integrity at all mounting heights, plus the
ability to customize the coverage for specific areas.
Functions
Signal Processing
Uses passive infrared and microwave technologies to
provide an alarm condition when both fields of protection
are simultaneously activated. Alarm signals must meet the
signaling requirements of both technologies to activate an
alarm.
First Step Processing
FSP allows virtually instant response to human targets
without sacrificing false alarm immunity to other sources.
By adjusting its sensitivity based upon signal amplitude,
polarity, slope and timing, FSP eliminates the need for the
installer to select the sensitivity level for the application.
Each sensor is processed individually and both must agree
there is an alarm before the alarm relay is activated.
Microwave Signal Processing
Adaptive processing adjusts to background disturbances.
This helps to reduce false alarms while maintaining catch
performance.
Microwave Supervision
Patented fully supervised microwave provides single
technology coverage in the event the microwave subsystem
fails.
Test Features
•
High efficiency LED and light-pipe system provide walk
test indication that is easily viewable from any angle and
at any mounting height.
•
Alarm memory feature allows detector to latch the
alarm LED to aid in response.
•
Remote LED walk-test control allows the LED to be
enabled or disabled using a switched input without
accessing the detector.
Certifications and Approvals
Region Certification
Europe CE DS9370 and DS9370-C: 89/336/EEC,
EN55022: 1998 +A1: 2000 +A2: 2003,
EN50130-4: 1996 +A1: 1998 +A2: 2003,
EN61000-4-2: 1995 +A1: 1998 +A2:
2001, EN61000-4-3: 2002 +A1: 2003,
EN61000-4-4: 1995 +A1: 2000 +A2:
2001, EN61000-4-5: 1995 +A1: 2001,
EN61000-4-6: 1996 +A1: 2001 +A2:
2001, EN61000-4-11: 1994 +A1: 2001,
EN60950-1: 2001 +A11: 2004, EN 300
440-2 V1.1.1: 2001-09, EN 300 489
Parts-1 and -3 V1.2.1: 2000-08
Belgium INCERT DS9370: B-509-0013
DS9370-BEL: B-509-0013/a
USA UL DS9370: ANSR: Intrusion Detection Units
(UL639), ANSR7: Intrusion Detection
Units Certified for Canada (cULus)
FCC ESV9370
Canada IC 1249A-12073
Brazil ANATEL 0871-03-1855
Singapore iDA LPREQ-S0154-2004
Australia DS9370: AUS C-tick
China CCC 2004031901000038
Europe Complies with EN50131‑1, Grade 2
Bosch Security Systems B.V. www.boschsecurity.com
5