Mitsubishi Electronics QD77MS16 Home Security System User Manual


  Open as PDF
of 1038
 
5 - 102
Chapter 5 Data Used for Positioning Control
• QD77MS4
Block
No.
1
Axis Block start data Condition Buffer memory GX Works2
7000
Axis 1
Start block 0
Condition data (1 to 10)
Supports the
settings
Supports the
settings
Axis 2 Condition data (1 to 10)
Axis 3 Condition data (1 to 10)
Axis 4 Condition data (1 to 10)
7001
Axis 1
Start block 1
Condition data (1 to 10)
Axis 2 Condition data (1 to 10)
Axis 3 Condition data (1 to 10)
Axis 4 Condition data (1 to 10)
7002
Axis 1
Start block 2
Condition data (1 to 10)
Axis 2 Condition data (1 to 10)
Axis 3 Condition data (1 to 10)
Axis 4 Condition data (1 to 10)
7003
Axis 1
Start block 3
Condition data (1 to 10)
Axis 2 Condition data (1 to 10)
Axis 3 Condition data (1 to 10)
Axis 4 Condition data (1 to 10)
7004
Axis 1
Start block 4
Condition data (1 to 10)
Axis 2 Condition data (1 to 10)
Axis 3 Condition data (1 to 10)
Axis 4 Condition data (1 to 10)
• QD77MS16
Block
No.
1
Axis Block start data Condition Buffer memory GX Works2
7000
Axis 1
Start block 0
Condition data (1 to 10)
Supports the
settings
Supports the
settings
to to
Axis 16 Condition data (1 to 10)
7001
Axis 1
Start block 1
Condition data (1 to 10)
to to
Axis 16 Condition data (1 to 10)
7002
Axis 1
Start block 2
Condition data (1 to 10)
to to
Axis 16 Condition data (1 to 10)
7003
Axis 1
Start block 3
Condition data (1 to 10)
to to
Axis 16 Condition data (1 to 10)
7004
Axis 1
Start block 4
Condition data (1 to 10)
to to
Axis 16 Condition data (1 to 10)
1
: Setting cannot be made when the "Pre-reading start function" is used. If you set any of Nos.
7000 to 7004 and perform the Pre-reading start function, the error "Outside start No. range"
(error code: 543) will occur.
(For details, refer to Section 13.7.7 "Pre-reading start function".)
 previous next